产品名称:asp -小型粉碎机挤出机塑料回收制粒生产线
Product Description
proimages/product/ASP_(0).jpg
proimages/product/ASP_(7).jpg
proimages/product/ASP_(6).jpg
proimages/product/ASP_(3).jpg

ASP-Mini 碎纸机 Extruder Plastic 回收 造球 Line

Crushing and granulating into one step;
It is used to recycle cleaned in-house film, 拉菲亚树, 头材料, 清洗, 中空的部分, 瓶子和发泡材料将节省成本和降低能耗.
给料方式可采用输送带、辊式牵引下料或破碎后由破碎机直接给料. ASP TM系列碎纸机是集碎纸机功能于一体的造粒系统, 破碎, 强制喂食, plasticization and pelletizing in one program.
Applied in the plastics recycling and pelletizing process, ASPTM系统是一种综合的、节约成本的解决方案, 如电影, 拉菲亚树, 修剪, 清洗, 中空的部分, bottle and foaming material in plant recycling.

Product Introduction

规范

机模型 ASPTM
Target recycled material HDPE,LDPE,PP,BOPP,CPP,OPP,PA,PC,PS,PU,ABS
Final Product Shape 粒子
System composition 带式输送机, 压碎机, single screw extruder, 过滤, 真空脱气, pelletizing system, water-cooling device, Dehydration Section, 输送机的粉丝, 产品筒仓.
输出范围 150公斤/小时
装料装置 Belt Conveyor (Standard), Roll Hualing off device (Optional)
螺杆直径 80毫米(标准)
螺杆材料 合金
L / D的螺丝 31 / 1、32 / 1、34 / 1、36 / 1(根据回收特点)
加热器的桶 Ceramic heater or Far-infrared heater
冷却的桶 Air cooling of fans through blowers
Vacuum deashing exhaust Two Double-zone 真空脱气 system (Standard)
微粒化类型 水环造粒/水链造粒/水下造粒
电压标准 According to the Voltage of the Customer's Location
Optioanl设备 金属检测仪,花岭滚下装置,母料和添加剂喂料器
保修 13 months from the date of bill of lading
技术服务 项目设计、工厂建设、安装建议、调试
proimages/product/细节_(4).JPG
喂养

作为标准设计, plastic scraps 如电影, 灯丝, 拉菲亚树s conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. 输送带及牵引装置的电机驱动与ABB变频器配合. 输送带或滚运的进料速度是全自动的,取决于压实机的空间有多满. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.

proimages/product/ASP_造球_.jpg
碎纸机

ASP系列粉碎造粒系统结合了粉碎功能, 破碎, 强制喂食, plasticization and pelletizing in one system.

proimages/product/fea_12_(1).jpg
Intelligent Control

智能启动:一键完成设定的物流顺序和物料处理要求, 智能停止:一键停止ACS系统中各相关模块部件均可一键关闭. 紧急停机当机器运行过程中出现不确定风险时,ACS系统具有紧急停机功能.

proimages/product/远程控制.jpg
Remote Monitoring And Information Transmission

System program remote monitoring and transmission system,ACS-Pro系统采用蓝牙技术,实现远程监控和信息传输功能.

proimages/product/螺杆.jpg
Single Screw Extruder

By screw’s rotation, the plastic material goes forward, to finish the processing of compacting, 融化, 均质化. 螺杆材料 adopts qualified nitride steel(38CrMoAlA), 数控的过程, with nitride treatment, has the ability of corrosion resistance and wear-resisting. With the specialized design of screw, even running with high speed, 聚烯烃材料在较低的温度和较低的熔化压力下可以很好地熔化.

proimages/product/细节_(6).JPG
The Rotatory Blades Of Compactor

The rotatory blades of compactor with cut up incoming scraps. 由高速旋转叶片引起的摩擦加热将加热并让碎片收缩到其凝结点以下. 可选设计的导向结构将物料压紧并导向挤出机螺杆. 压碎, 干燥和压缩材料,使快速和稳定的饲料从压实机直接进入挤出机.

proimages/product/9.jpg

Because of the super L/D ratio, 生产线上的单级挤出机可以作为双级挤出机使用. 中间双活塞式筛网过滤器后,可在尾部加另一个过滤器. 双过滤标准可以提高最终产品颗粒的质量和性能.

proimages/product/SCF.jpg
2接入1选择

This model combines our self-developed self-cleaning filter.新型SCF自洁过滤系统,实现不停机循环挤压, 特别适用于高污染物料的再制粒. SCF过滤系统可以处理和去除熔体流动中高达5%的污染物, can separate the contaminates as: paper, 木, 铝, unmelted plastic and rubbers etc.

proimages/product/细节_(9).JPG
熔体过滤

挤出机机头可安装常规的单板/活塞双工位换网器或不停机双板/活塞四工位换网器,过滤性能显著. 对过滤技术的要求在很大程度上取决于输入材料的质量以及颗粒的计划使用.

proimages/SAM_2913.JPG
液体出口

对于需要更好的熔体过滤和更高的产量,这是最合适的工艺. In the first stage,两段制粒生产线可设计两台或多台单螺杆挤出机, 然后可以同时进入第二段挤出机.

proimages/product/细节_(10).jpg
造球

模面水环制粒系统是ACSS-HTM制粒系统的标准制粒方法. 由于一贯正确的叶片压力,自调整的制粒头具有最佳的颗粒质量和较长的正常运行时间. 旋转叶片的转速根据熔体挤压压力自动调整.

proimages/product/震动泵.JPG
振动干燥

先进的脱水振动筛与卧式离心脱水相结合,具有高性能干燥球团,能耗低.

proimages/product/细节_(13).jpg
塑料粒子

Final output: plastic particles.

proimages/product/料仓.jpg
包装系统

干燥振动筛与卧式离心机配合,可获得良好的干燥效果, and less energy consumption.

  • 集粉碎、压实、粉碎为一体,节省人工成本.
  • 加料效率高,适用于薄膜、长丝、酒夫、发泡等物料;
  • Lower investment cost for a high quality and durable machine;
  • Low energy consumption with high production output;
  • Overseas installation and training are available;
  • Machine warranty with spares in stocking and in-time delivery;
365买球App下载